VETTA SP 4 - VETTA SP 4 MINERAL |
Cold flexibility:
-15°C |
Reinforcement:
CONTINUOUS POLYESTER FILAMENT OF HEAVY-WEIGHT |
Quality guaranteed:
   |
Patents:
 |
| VETTA SP 4 and VETTA SP 4 MINERAL are high performance elastoplastomeric prefabricated waterproofing membranes. They are made from a distilled bitumen compound base modified with POLYPROPYLENE and a constant reinforced non-woven polyester filament; SPUNBOND. VETTA SP 4 and VETTA SP 4 MINERAL are both produced with a lower faced protective lining made of POLYFLAM the special anti-adhesive polyethylene film to be torched during application. |
|
|
| Quality guaranteed |
| VITA SP 4 and VITA SP 4 MINERAL have gained the I.C.I.T.E. agreement which certifies the company's ability to constantly maintain high product standards. |
|
|
| Where to apply |
| VETTA SP 4 and VETTA SP 4 MINERAL are suitable for surfaces subject to high stress. They can adhere to substrates perfectly. The excellent mechanical characteristics as well as their dimensional stability make them suitable to be used in civil and industrial waterproofing applications where traditional, metallic or pre-fabricated structures require these qualities. |
|
|
| How to apply |
| VETTA SP 4 and VETTA SP 4 MINERAL has both surfaces covered with POLYFLAM, the special polyethylene anti-adhesive film to be torched during application; in the mineral version, the top surface is covered by a uniform layer of natural or coloured slate chips and supplied with two-side overlapping strips (BYSTOP, registered mark). The substrate must be dry, clean and smooth. The membrane is applied by torching it with a light propane gas flame. Application is quick and easy. |
|
|
| Colours |
| The mineral slate chips can be grey, green, red, white and brown. |
|
|
|
|
Info request